Technical data | EL7047 |
---|
Technology | direct motor connection |
Number of outputs | 1 stepper motor, 2 phases, 1 brake configurable (0.5 A) |
Number of inputs | 2 limit position, 4 for an encoder system |
Load type | uni- or bipolar stepper motors |
Nominal voltage | 8…50 V DC |
Power supply | via the E-bus |
Max. output current | 5 A (overload- and short-circuit-proof) |
Performance increase | Yes, through ZB8610 fan cartridge |
output current with ZB8610 | max. 6.5 A (overload- and short-circuit-proof) |
Max. step frequency | 1000, 2000, 4000, 8000 or 16,000 full steps/s (configurable) |
Step pattern | 64-fold micro stepping |
Current controller frequency | approx. 30 kHz |
Diagnostics LED | error phase A and B, loss of step/stagnation, power, enable |
Resolution | approx. 5000 positions in typ. applications (per revolution) |
Electrical isolation | 500 V (E-bus/signal voltage) |
Current consumption power contacts | typ. 50 mA |
Current consumption E-bus | typ. 100 mA |
Distributed clocks | yes |
Encoder input signal | 5…24 V DC, 5 mA, single-ended |
Pulse frequency | max. 400,000 increments/s (with 4-fold evaluation) |
Special features | travel distance control, encoder input, vector control |
Weight | approx. 90 g |
Operating/storage temperature | 0…+55 °C/-25…+85 °C |
Relative humidity | 95 %, no condensation |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos. | IP 20/see documentation |
Approvals | CE, UL |
Accessories | |
---|
EL9576 | brake chopper terminal, 72 V, 155 µF |
ZB8610 | fan cartridge for EtherCAT and Bus Terminals |
AS2022-wHy0 | stepper motor, 50 V DC, 1.5 Nm standstill torque, 5.6 A standstill current |
AS2023-wJy0 | stepper motor, 50 V DC, 2.3 Nm standstill torque, 6.4 A standstill current |
AS2042-wHy0 | stepper motor, 50 V DC, 6.4 Nm standstill torque, 5.6 A standstill current |
Cables, gears and couplings | accessories for AS2000 stepper motors |
Related products | |
---|
EL7041 | stepper motor EtherCAT Terminal, IMAX = 5 A, 50 V, IP 20 |
EL7037 | stepper motor EtherCAT Terminal, IMAX = 1.5 A, 24 V, IP 20, vector control |
EL7031 | stepper motor EtherCAT Terminal, IMAX = 1.5 A, 24 V, IP 20 |
EP7041-0002 | stepper motor EtherCAT Box (industrial housing), IMAX = 5 A, 50 V, IP 67 |
KL2531 | stepper motor Bus Terminal, IMAX = 1.5 A, 24 V, IP 20 |
KL2541 | stepper motor Bus Terminal, IMAX = 5 A, 50 V, IP 20 |